LRX
TRUCKS
Mobile Lighting
LRX SINGLES
6 - 12 - 18K Par
LRX
PIRANHA
Mobile Lighting
LRX
SCORPION
23.4K Fay Light” thirty-six DWE bulbs
LRX
RAPTOR
18K Maxi” using eighteen Par 64 bulbs
LRX
TROLLEY
Powered Beam Trolley
LRX 144K
LIGHTING
144K Par 64 bulbs
LRX
CLAM LIGHT
16' X 36' Soft Box
LRX
MOON CUBE
10' x 10' x 10'
CORRECTION FILTERS
CTO Hard Filters
NEW STUFF
FILMING PLATFORMS
FABRICATION SHOP
**********************
LOCAL
1-416-287-3107
DURHAM
905-686-3333
TOLL FREE
1-877-688-2110
FAX
905-686-8546
POWERED TROLLEY
LRX RAPTOR
Shown With
Optional LRX Trolley
LRX
Raptor
flyer
Extreme Temperature Correction Filters
¼, ½, ¾ and Full CTO
Correction
filters
that never shift or burn out.
This filter are made for the LRX Singles
NEW - LRX Wireless Remote Control
LRX SCORPION
-
-
-
-
-
-
-
Patents Pending
The design concept using multiple bulbs
in a tight arrangement is definitely not new, and it has proved itself time and
again to become an industry standard.
The LRX SCORPION-36 head is an advance forward in safety and remote position-ability
where sets are built after the lighting is installed and focusing could be a
difficult or time consuming task.
Tilt and pan are operated from our hand controller or any DMX type lighting
console.
FEATURES:
1. Thirty-six - 650 watt DWE bulbs- 24.8 Kilowatt total output.
2. Change light density with out dimming; the fixture has been wired to accept
two - nineteen pin soca-pex cables and the bulbs are in groups of three.
3. Robotics built in, no motors or adapters required.
4. Pan - 360 degrees non continuous.
5. Tilt- (0 degrees to minus 120 degrees.
6. Fits most truss systems with 2” (or less) diameter chords.
7. Easy external touch pad DMX addressing.
8. Our exclusive easy mount, mounting system-(Patent Pending).
9. Convenient hand controller that can control up to thirty-two fixtures.
10. Gel frame holder available.
11. Power to operate robotics 110/120 VAC - 50/60 Hertz - non dimmed line.
These fixtures are extremely light but incredibly strong and robust. They have
been manufactured using the latest technologies available to ensure quality and
long trouble free life.
Set-up is so efficient that it takes only minutes!
With features like; robotics built right into the fixture, external DMX
addressing, 650 watt DWE type lamps and our exclusive easy mount, mounting
system and more,
all add up to no wasted time. The fixture can be mounted on most aerial lifts,
using our approved condor mounting system or anyplace else that truss can be
installed, (cantilevered from rooftops, hung in ceilings, etc.). Our positive
fixture mounting means no chance of movement or weathervane from the wind. Once
the fixture is in place focusing can be done quickly & safely from the supplied
hardwired DMX hand controller or your DMX system, letting you put light exactly
where you want, without the worry of operator safety or exposure.
LRX SINGLES
- 18K HMI PAR.
WEATHER PROOF ROBOTIC FIXTURES
The same fixture will accept
6K - 12K HMI or 12K TUNGSTEN BULBS
ONE FIXTURE -
FOUR BULB CHOICES
ONE FIXTURE - FOUR BULB CHOICES
Patents Pending
Patents Pending
The LRX line of products was proudly introduced in the early 1990’s. The LRX Single is a completely self-contained robotic lighting system. The LRX Single
lamp fixtures are designed to work with existing cables, power supplies and industry standard dimmers.
Set-up is so efficient that it takes only minutes.
Switching the lamp fixture from Metal Halide (daylight) to tungsten is handled automatically in the LRX Single, all you do is change the bulb and power supply;
the LRX Single will do the rest. The LRX Single is so versatile it can be used as a daylight source at the beginning of the day and switched to an incandescent
source part way thru the workday in a matter of minutes.
The LRX Single lighting system comes complete with a robotic lighting head, integrated gel frame holders, DMX hardwire remote control, DMX cable and a
shipping case. There is an optional condor mounting system and cable management system that is exclusive to LRX.
Each LRX Single lamp fixture will accept a standard single-ended 6K – 12K - 18K Metal Halide (daylight) or 12K Tungsten bulb. For maximum unrestricted
output, it is paired with a radiant-engineered parabolic reflector that allows the lamp fixture a smooth transition between a very narrow spot and a smooth wide flood.
The lamp body is mounted to our robotic yoke, which provides a wide range of tilt, pan, spot and flood functions from a hardwire remote control. The LRX Single
can be mounted on most aerial lifts, rooftops, grids, etc. Positioning the LRX Single can be done safely and exactly where you want it.
The LRX Single gel frame holder is mounted to the front of the lamp housing so that it moves with the lamp as it tilts and pans. The gel frame holder is
engineered and constructed to quickly and easily accept any combination of color, diffusion, and heat shield on a thirty-inch square gel frame. Light reflected from
the lamp side of the gel is prevented from escaping outside of the housing, so that the light is exactly where you want it.
Tight spots are not a problem. With one fixture, you can backlight your foreground and with a second fixture, front-light your background – the possibilities
are endless.
The LRX Single is the perfect fit for every location and every budget!
WATER JET CUTTING
6 ft x 12 ft (1.8 m x 3.7 m) tolerances as tight as ±.001 and even +/- .0005in.
At DWIGHT CRANE we would be happy to provide a quote on your work.
We can cut Glass, Wood, Plastic, Concrete, Steel, Marble, “Anything”
CAM REMOTE BRACKET
The Cam Remote Bracket is the perfect link between any construction type crane boom and a camera remote system. It comes standard with a leveling head Mitchell Mount
HAAS
VF - 4
CNC Milling Center
Cutting Travels X - 50" Y - 20" Z - 25"
SL-30 CNC LATHE
17.0" Max. Cut Dia. x 34.0" Max. Length
 |
 |
At DWIGHT CRANE we would be happy to quote on you work.
LRX - PIRANHA
6K HMI - 12K HMI - 12K TUNGSTEN
Patents Pending
HMI Square wave
(Flicker Free) Dimmable
Tungsten Dimmable
Wireless Remote Control head
80' High Boom
4 Wheel Drive
Fast Setup
1 Minute Bulb Change
Individual Gel Frames
30 Second Colour of Diffusion Change
MAX Draw 375 AMPS / 125 PER LEG (Customer
to supply)
VOLTAGE 120-208
INPUT CONNECTORS - CAMLOCK TYPE "E" SERIES
 |
 |
 |
 |
Patents Pending
CARRY DECK CRANES
DWIGHT CRANE
LTD.
Now offers carry deck cranes from 5 to 15 ton capacity.
Carry deck cranes excel in both outdoor and indoor conditions. Because of their size and features these cranes operate in spots others cannot. Their ability to pass though low narrow doors or openings, and maneuver into tight spaces while lifting heavy loads into place at the same time, make them indispensable. Carry deck cranes make short work of a tough job since you can carry large loads on the deck or drive with a load hung from the hook. Cost effectiveness and efficiency make this crane a plus for any production’s budget.
