LRX LIGHTING
-LRX
TRUCKS
-SINGLES
-PIRANHA
-SCORPION
-RAPTOR
-POWERED
TROLLEY
-144K
LIGHTING
-CLAM
LIGHT
-MOON
CUBE
-CORRECTION
FILTERS
-NEW
STUFF
-FILMING
PLATFORMS
-FABRICATION SHOP
LOCAL
1-416-287-3107
DURHAM
905-686-3333
TOLL FREE
1-877-688-2110
FAX
905-686-8546
KEEPING YOUR CREW SAFE & THE LIGHTS WHERE YOU WANT THEM
SCORPION
23.4 K TUNGSTEN
FULLY ROBOTIC
DMX CONTROL
650 WATT DWE BULBS
NINETEEN PIN SOCA-PEX
EXCLUSIVE TRUSS MOUNT SYSTEM
GEL FRAME HOLDER
SILENT
OPTIONAL POWERED TROLLEY (DMX CONTROLLED OFF OF FIXTURE)
Pricing:
SCORPION - $300.00 per day - 2 day
week
TROLLEY - $100.00 per day - 2 day week
Discounts available - contact your local dealer
FLYERS DOWNLOAD
LRX Scorpion Flyer
The design concept using multiple bulbs in a tight
arrangement is definitely not new, and it has proved itself time and again to
become an
industry standard.
The LRX Scorpion head is an advance forward in safety and remote position-ability
where sets are built after the lighting is installed and
focusing could be a difficult or time consuming task.
Pan, Tilt & optional Trolley are operated from our hand controller or any DMX type lighting
console.
FEATURES:
1.Thirty-six - 650 watt DWE bulbs- 23.4 Kilowatt total output.
2.Change light density with out dimming; the fixture has been wired to accept
two - nineteen pin soca-pex cables and the bulbs are
grouped in three.
3.Robotics built in, no motors or adapters required.
4.Pan - 360 degrees non continuous.
5.Tilt - 0 degrees to minus 120 degrees.
6.Fits most truss systems with 2” (or less) diameter chords.
7.Easy external touch pad DMX addressing.
8.Our exclusive easy mount, mounting system-(Patent Pending).
9.Convenient hand controller that can control up to thirty-two fixtures.
10.Gel frame holder included.
11.Power to operate robotics 110/120 VAC - 50/60 Hertz - non dimmed line.
These Fixtures are extremely light but incredibly strong and robust. They have
been manufactured using the latest technologies available to
ensure quality and long trouble free life.
Set-up is so efficient that it takes only minutes!
With features like; robotics built right into the fixture, external DMX
addressing, 650 watt DWE type lamps and our exclusive easy mount,
mounting system and more, all add up to no wasted time. The fixture can be
mounted on most aerial lifts, using our approved condor
mounting system or any place else that truss can be installed, (cantilevered from
rooftops, hung in ceilings, etc.). Our positive fixture
mounting means no chance of movement or weathervane from the wind. Once the
fixture is in place focusing can be done quickly & safely
from the supplied hardwired DMX hand controller or your DMX system, letting you
put light exactly where you want, without the worry of
operator safety or exposure.